+44 (0)20 7481 4897
Mr Ben Adams
Prior to joining Hawkins, Ben has gained more than 15 years' experience working in the power industry ...
Dr John Allum
John has a degree in Analytical Chemistry from Plymouth University and a PhD in Emulsion Explosives ...
Dr John Anderson
After completing the research project for his Doctorate, John joined the International Tin Research ...
Mr Neil Arthur
Neil has in excess of 20 years of experience in engineering, which commenced with employment by the ...
Mr Nick Ashby
Following graduation Nick began his engineering career with the Central Electricity Generating Board ...
Mr Richard Baker
Richard graduated from the University of Nottingham in 2009 with a Masters degree in Mechanical Engineering. ...
Dr Patrick Barbour
Having obtained a Masters degree in Mechanical Engineering, Patrick spent two years designing sub-sea ...
Ms Lisa Beck
Following completion of her Diploma, Lisa worked for a large wine co-operative in the Stellenbosch ...
Eur Ing Chris Botham
Chris began his engineering career in 1978 as an apprentice welding and fabrication engineer at National ...
Mr Jon Boyle
Jon began his engineering career as a sponsored student with Lucas Aerospace where he assisted with ...
Mr Stephen Braund
Stephen is a Chartered Engineer and holds a degree in Electrical and Electronic Engineering. Before ...
Mr Stephen Brough
Stephen gained his degree in Materials Engineering from Loughborough University in 2010. The degree ...
Mr Andy Bryce
Andrew's career in forensic engineering began while carrying out an undergraduate placement at the ...
Dr Carl Butler
After his PhD, Carl became a post-doctoral research associate in the Chemical Engineering Department ...
Dr John Camplin
John started his career in 1992 working as a research technician at the University of York, Chemistry ...
Dr Nick Carey
Nick joined Hawkins in June 2012 after a 27 year career with the London Fire Brigade. During the last ...
Mr Alex Chambers
After Cardiff Business School, Alex qualified as a Chartered Management Accountant in 2001.Prior ...
Dr Chun Chan
Prior to his arrival in Hong Kong, Chun worked at Technip Umbilicals as a metallurgy development engineer ...
Mr Mike Charlton
Mike's career in forensic engineering began in 1982 with CAPCIS, a Consultancy organisation that was ...
Mr Rennie Chivers
Rennie joined Hawkins in May 2009 after a career with Essex Police spanning 33 years. He was involved ...
Mr Ross Clarke
Ross graduated from Loughborough University in 2013 with a master’s degree in Automotive Engineering.During ...
Mr Luke Collins
Following his Masters in Aerospace Engineering, Luke worked as a Dynamic Test Technician for Ipeco ...
Mr Darren Cook
Darren was sponsored through his MEng degree at Strathclyde University by NACCO Materials Handling ...
Mr Graham Cooper
Graham obtained his first degree in Materials Technology from Coventry Polytechnic and his Masters ...
Mr Jonathan Dance
Jonathan graduated from The University of Exeter with a degree in Physics in 2019. During his time ...
Mr Chris Dennis
In 2003, after completing his Masters Degree in Mechanical Engineering at the University of Birmingham, ...
Mr Gareth Dobinson
Gareth started his career in engineering with an industrial placement during his third year at Loughborough ...
Mr Graeme Drysdale
Graeme joined the Glasgow Claims Department of Commercial Union in 1982 and left to join Thomas Howell ...
Dr Robert Edwards
After completing a Post Doctoral Research Fellowship, Robert joined Liverpool John Moores University ...
Mr Jonathan Emm
Jonathan's engineering career began at Morganite Thermal Ceramics. Here he ran projects to develop ...
Mrs Nicola Fallowfield-Smith
Nicola graduated from Reading University in 2008 with a 1st Class Master's degree in Mechanical Engineering, ...
Dr Christabel Fitzpatrick
Christabel graduated from Imperial College London with a 1st Class degree in Aerospace Materials. ...
Dr Richard John Fletcher
Richard started his career in science with an industrial placement during his third year at University. ...
Dr Richard Fletcher
Richard started his career in academia working first as a Research Assistant and then as a Lecturer ...
Ms Hannah Fletcher
Hannah graduated with a first class degree in Civil Engineering from Imperial College London in 2011. ...
Ms Melissa Gartside
Melissa has almost 20 years’ experience in materials engineering. After graduating from the University ...
Eur Ing Paul Gee
Paul started his career in engineering in 1988, with a four year technician apprenticeship with GEC ...
Mr Ian Giddings
Ian gained sponsorship for his degree from GEC Satchwell Control Systems. Whilst studying for his ...
Mr Richard Giles-Carlsson
Richard graduated from Imperial College in 2012 with a first class degree in Civil Engineering. During ...
Mrs Camilla Gosling
Camilla has an MSc in Forensic Science, from the University of Strathclyde, which included a research ...
Ms Sarah Griffith
Sarah started her career in forensic science in 1986 when she joined the Metropolitan Police Forensic ...
Dr Roy Hawkins
Roy started his career in 1968 as Senior Physicist at Cambridge Consultants Limited and then in 1970 ...
Mr Richard Heath
After obtaining a First Class Honours Degree in Electronic Engineering from the University of York ...
Mrs Christina Holland
Christina graduated with an Honours Degree in Mechanical Engineering from University College Dublin, ...
Mr John Holland
John graduated with a 1st Class Honours Degree in Mechanical Engineering from University College Dublin, ...
Ms Sarah Hooton
Sarah graduated with a first class degree in Civil Engineering, specialising in Structural Engineering ...
Mr Mike Hopwood
Mike's civil and highway engineering career began at Parkman where he worked on several major projects, ...
Dr John Horsfall
John began his career in science designing and deploying systems for earthquake and volcano monitoring ...
Mr Gary Hotchkiss
In 1980 Gary began his engineering career as a sponsored student with Brush Electrical Machines Ltd. ...
Mr Paul Hughes
Paul left Newcastle University in 2007 with a Masters Degree in Civil and Structural Engineering. ...
Dr Will Hutchinson
Will started his career in science with an industrial placement during his third year at University. ...
Mr Andy Ingle
Andy started his career working in a civil / structural design office carrying out structural and ...
Dr Jake Irwin
After completing a PhD at the University of Sydney, Jake joined the National Measurement Institute ...
Dr Eleanor Jay
Eleanor graduated with a 1st Class Masters Degree in Materials Science and Engineering from Imperial ...
Mr Richard Keightley
Richard graduated from Victoria University of Wellington, New Zealand in 2003 with a Bachelor of Science ...
Mr James Kingham
James graduated from the University of Birmingham in 2005 with a Master’s Degree in Mechanical Engineering, ...
Dr Anna Knight
After completing her first degree and before starting her Masters Degree, Anna carried out a summer ...
Ms Rosalind Lambert-Porter
Rosalind is an acoustics consultant with degrees in both Audiology and Acoustics. With consulting ...
Mrs Erin LeMaster
Erin has a degree in Digital Forensics from Bloomsburg University of Pennsylvania, USA and is trained ...
Dr Paul Lemon
During his first degree, Paul spent a year with the Health & Safety Executive as part of a small ...
Mr Justin Lewis
Justin joined Hawkins in 2012 after a career spanning over 21 years in the Forensic Science Service ...
Mr Ben Lister
In 2008, Ben graduated from Churchill College at the University of Cambridge where he read for the ...
Mr Tom Madden
After completing his Master’s degree in Electrical and Electronic Engineering at the University ...
Mr Ian Major
Ian started his career working for Aspen Burrow Crocker on a variety of civil engineering projects. ...
Dr Claire Mann
Claire carried out her first Masters Degree at Oxford University, where she remained to complete a ...
Mr Wayne Manton
After completing a foundation year in Mechanical Engineering at the University of Birmingham, Wayne ...
Mr Paul Mason
Before joining Hawkins, Paul gained more than 25 years of operational experience in the refinery and ...
Dr Andrew Moncrieff
Andrew began his post-graduate academic career studying the rocks and sediments left behind in East ...
Dr Paul Moody
Paul completed his undergraduate degree in Metallurgy at the University of Birmingham in 1990. During ...
Mr Charles Murdoch
Charles' background is in materials, having graduated with an MEng in Materials Science and Engineering ...
Eur Ing Andrew Muston
On leaving university Andrew joined the Engineering Department of ICI, Teesside where he worked alongside ...
Mr Damian Mutch
After graduating in applied physics Damian joined Kent Police. He has been attending and investigating ...
Mr Rod Newbery
After graduating, Rod worked for the engineering group TI at its Research Laboratory where he was ...
Ms Jessica Ng
Following the completion of her first degree in Physical Science, Jessica went on to pursue a Master’s ...
Dr Andy Ninham
Andrew started his career in research with a post-doctoral position for the US Department of Energy ...
Dr Sophie Parsons
Sophie is a Chartered Engineer (CEng) and a Fellow of the Institute of Materials, Minerals, and Mining ...
Dr Tom Peat
Tom graduated with a MEng in Aero-Mechanical Engineering from the University of Strathclyde in 2013. ...
Mr Martin Pope
Martin is a Chartered Physicist and has a broad-based science degree from The Open University, which ...
Dr Andrew Prickett
As part of his first degree Andrew worked for Alusuisse, Switzerland analysing production methods ...
Mr Adrian Ratte
Adrian's background is diverse, having gained experience with oil and gas exploration in the Canadian ...
Mr Andrew Reeves
Andrew graduated from Cambridge University in 1992 with a first class degree in Engineering Science, ...
Mr David Reid Rowland
David graduated with an MSc in Mechanical Engineering from the University of Cape Town, South Africa ...
Mr Peter Reupke
Peter's engineering career started in the textile industry where he worked on improving textile laminating ...
Dr David Rose
David's career started in the Technical Services and Development Laboratory at the BP facility in ...
Ms Helen Rosser
Following the completion of her first degree at Aston University Helen worked as a chemist, developing ...
Mr Russell Smith
After graduating, Russell was employed by the Avon & Somerset Constabulary as a Scenes of Crime ...
Dr Lin Sun
Lin began his scientific career by conducting PhD research on the structure-property-performance relationship ...
Dr Ian Tatner
Having completed his PhD looking into the corrosion fatigue of stainless steel turbine blade materials, ...
Mr Neville Tranter
Following completion of his degree in Metallurgy at the University of Birmingham, Neville worked as ...
Mr Bernard Travers
Bernard graduated from Cambridge University in 2010 with a degree in Engineering, specialising in ...
Mr Mark Turner
After completing his degree in Materials Science and Engineering at the University of Sheffield, ...
Dr Simon Vallance
Having obtained a masters degree in Chemistry, Simon went on to study for his Doctorate at the University ...
Mr James Wade
James graduated from the University of Leeds in 2006 with a MEng degree in Automotive Engineering. ...
Dr Chris Wareham
After he graduated, Chris completed a doctoral research project on the isotope and trace element chemistries ...
Mr Jon Watkins
Jon graduated from Imperial College London in 2010 with a first class degree in Civil Engineering. ...
Mr Stuart Whitehead
Stuart began his engineering career at Gee and Company in Birmingham where he was responsible for ...
Mr Paul Willis
Following on from his degree thesis research Paul worked with a specialist research group at Southmead ...
Dr Iain Woodward
Iain left Durham University in 2001 after completing his PhD research into modification of polymeric ...
Dr Nick Wright
Nick's first job following graduation was for the Cookson Group at its research centre near Oxford, ...
Mr Nico Zurcher
Prior to becoming an investigator, Nico worked in a leading international environmental consultancy ...
