Gerald Deshais

Gerald completed his PhD in Materials Science at the University of Cambridge in 1999, where he investigated the resistance of 7XXX alloys to stress corrosion cracking on behalf of Péchiney (now part of Rio Tinto Alcan).

Nick Wright

Nick’s first job following graduation was for the Cookson Group at its research centre near Oxford, where he carried out materials development and testing work. Following this, Nick returned to the University of Birmingham where he gained a PhD developing polymer matrix composite engineering components. Nick joined Cosworth Ltd in 1999 as a Materials Engineer, developing materials and processing technologies for Formula 1 Engine applications. This work included a large number of failure investigations on race and road vehicle components. In 2006 Nick joined ERA Technology Ltd, working initially in the Gas Turbine group on failure investigations and remaining lifetime assessment. He became increasingly involved in failure investigations in a wide variety of applications including power generation, petrochemical process plants, electrical distribution, general industrial and road vehicles. This led to his appointment as head of the Forensic Engineering service line at ERA, where he led a team of engineers supporting loss adjusters, insurers, manufacturers and owners/operators. Nick joined Hawkins in 2013, where he works as a Principal Associate based at our London office.

Neville Tranter

Following completion of his degree in Metallurgy at the University of Birmingham, Neville worked as a Graduate Heat Treatment Engineer at Wallwork Heat Treatment. This focused his knowledge of working in hazardous environments. It was from the work undertaken at Wallwork that Neville gained an interest in failure investigations and decided to broaden his knowledge by undertaking a Master of Science degree in Forensic Engineering and Science at Cranfield University. Following his Masters, Neville worked for Intertek Plc, running Rolls-Royce’s out-sourced Metallurgical Laboratory. This gave him exposure to materials science and general engineering of gas turbine engines and failure analysis. Intertek also undertook failure investigations from a wide range of third-parties. Through this work, he conducted over 100 metallurgical and failure investigations including: multi-million pound oil and gas industry losses medical devices and equipment railway rolling-stock and systems consumer products and patent infringement. After Intertek, Neville moved to Goodrich Corporation as a Materials Engineer where he investigated failures, non-conformance and manufacturing issues on hydraulic and electric aerospace actuation systems. Since joining Hawkins, Neville has specialised in the investigation of engineering failures and is currently working as a Principal Associate in our Birmingham office.

David Rose

David’s career started in the Technical Services and Development Laboratory at the BP facility in Hythe. He then moved on to study anti-oxidant behaviour in lubricating oils for his PhD at the School of Chemistry at Leeds University. After graduation he studied hydrocarbon combustion as a research fellow. In 1993 David joined the Defence Research Agency (latterly known as DERA) working for the Fuels & Lubricants Centre in Farnborough, running the Fluids Handling and Flammability Hazards laboratories. His research varied from developing methods of preventing gearbox explosions, self-cleaning filtration systems, the compression ignition of hydraulic fluids to fuel reformation for fuel cells. He acted as a consultant to the Armed Forces concerning fire hazards associated with fuels and lubricants. David became interested in forensic investigation while working as part of the DERA TWA 800 air accident investigation team, investigating the destruction of a Boeing 747 that was caused by the ignition of a fuel-air mixture in the centre wing tank. Since joining Hawkins in 2001, David has carried out over 1,000 forensic investigations involving petrochemicals, confined space entry, fire and explosion incidents both in the United Kingdom and overseas. These cases have included small scale incidents to multi-million pound losses […]

Paul Moody

Paul completed his undergraduate degree in Metallurgy at the University of Birmingham in 1990. During this time, he was sponsored by British Steel and gained work experience at Swinden Labs in Rotherham. Paul later completed his Doctorate at the University of Birmingham, researching the fracture properties of welded structural steels in relation to the oxygen content of weld metals. The work was sponsored by ESAB, headquartered in Waltham Cross in London. After completing his studies in 1995, Paul began his career at the Defence Research Agency as a Research Scientist, working on welding of high strength naval steels and investigations of failed components. Following this, Paul worked as a Metallurgist at a number of firms including Bodycote Materials Testing Ltd, Ingenco Ltd (formerly Scottish Power Technology), and Doosan Babcock Ltd. Paul’s experience includes facilitating contract materials testing for the offshore oil and gas services industry, performing remanent life assessment on boilers for power plants and petrochemical sites, investigating failed components, and providing support on materials related issues. Since joining Hawkins in 2017, Paul has worked on cases involving escapes of water, personal injuries, petrochemical sites and boilers for power generation. Paul’s boiler and petrochemical site investigations have taken place in […]

Clara Coombes

Clara is originally from Canada and graduated from the University of Toronto with a 1st class undergraduate degree in Chemical Engineering. Her academic interests include energy systems and different methods of power generation, as well as their wider impacts such as safety, environmental risks, and economic issues. After her undergraduate degree, Clara moved to the UK to begin a MPhil in Advanced Chemical Engineering at Cambridge University. She continued to pursue her interest in energy generation and policy, completing her Master’s course with a thesis exploring various scenarios by which small floating nuclear power plants might be used to provide civil power for the UK. Following on from her Master’s degree, Clara began a PhD in Nuclear & Civil Engineering at Cambridge University. Her PhD research focussed on the modular manufacture and construction of small nuclear reactors. In her thesis, Clara developed models to estimate the build times and costs associated with different levels of offsite construction for factory-built, modular nuclear reactors. Clara’s PhD was industry sponsored and allowed her to complete a short secondment in Derby with the nuclear team at Rolls-Royce. This enabled her research to investigate some of the key industry questions pertaining to small modular nuclear […]

Ben Lister

In 2008, Ben graduated from Churchill College at the University of Cambridge where he read for the Engineering Tripos and specialised in Electrical & Electronic Engineering. As part of his degree, Ben spent a year working in Sharjah, UAE as a design engineer and financial modeller for a small petroleum company involved in the construction of a new gas processing plant, and also completed an internship in the USA as an engineering specialist in the purchasing division of a large engine manufacturer. After graduation, Ben joined the engineering and research section of E.ON as a specialist in system modelling and analysis, initially focusing on renewable electrical generation technologies. The following years covered projects in a number of sectors including: MV distribution networks for industrial sites; analysis support for regional public distribution network operators, and an R&D portfolio, including electric vehicles and smart grid communication technologies. Ben later moved into a role supporting the commodities trading business with engineering analysis of the interaction between markets and electrical networks. In 2016, E.ON split its fossil fuel assets to form a separate company, Uniper. During this time, Ben moved back into a project support role as a microgrid and battery specialist on a […]

Jonathan Emm

Jonathan’s engineering career began at Morganite Thermal Ceramics. Here he ran projects to develop a non-destructive testing technique for their foundry ceramic products, as well as a new product with very high thermal shock resistance. Jonathan joined BAE SYSTEMS in 2000 as an engineer in the Advanced Technology Centre, Stealth Materials Group. He ran development and application engineering projects there, mostly using elastomeric and composite materials as radar absorbent or transparent media. These were applied to military aircraft, ships and vehicles. This work enabled him to develop strong project management skills and in his last year he led a team of engineers and scientists in developing a sprayable, radar absorbent coating for aircrafts. In 2003 Jonathan joined Cytec Engineered Materials, where he ran qualification testing programmes for aerospace composite materials and provided technical advice and assistance to customers, particularly in relation to processing issues. His customers included Airbus, Boeing and Lockheed Martin, with whom he worked to incorporate advanced, recently developed materials into their aircraft structures. Jonathan joined Hawkins in January 2007, where he trained in the investigation of fires and explosions to add to his engineering expertise. Jonathan has now been involved with a broad range of forensic engineering […]

Graham Cooper

Graham obtained his first degree in Materials Technology from Coventry Polytechnic and his Masters degree in Advanced Materials Technology from the University of Surrey. He has been a Chartered Engineer since 1991 and is a Professional Member of the Institute of Materials, Minerals & Mining. After graduation, he spent 10 years with British Aerospace where he was primarily involved with materials development, manufacturing support and aircraft defect investigation. He went on to work for British Airways in 1995 as their company metallurgist and defect investigation specialist before joining Burgoynes in 1998. Graham has investigated over 500 mechanical and materials related cases including aircraft accidents and incidents, marine accidents and losses, road traffic accidents, rail accidents, oil and gas production and pipeline incidents, industrial process plant incidents and power generation turbine failures. He has previously worked in Singapore and has undertaken investigations in the UK, Ireland, Europe, South Africa, Middle East, Far East and Australia. He has acted as an Expert Witness and Single Joint Expert in litigation cases and has given expert evidence in civil and criminal court cases, arbitrations and mediations. Graham joined our Leeds office as a Principal Associate in August 2014, and is now based in our […]

Nick Ashby

Following graduation Nick began his engineering career with the Central Electricity Generating Board as a graduate apprentice, which involved a two year technical training programme covering all aspects of the UK Electricity Supply Industry. Upon completion of his formal training Nick was appointed to a position within the Engineering Department of a 2000MW coal fired power station in Kent. For the next ten years Nick undertook a variety of technical operations and engineering roles within coal and gas power stations. During this time Nick was fully authorised under Powergen’s Electromechanical Safety Rules as well as being authorised under the National Grid Safety Rules. Nick discharged a number of shift management positions where he was responsible for the operation of all types of electrical and mechanical equipment associated with the generation and transmission of electricity. In 1998 Nick assumed a position with Powergen International in Hungary, as part of the senior management team of a new build Combined Heat and Power (CHP) power station. Nick had specific responsibility for the safety and technical training of the Hungarian operations staff, together with providing the operational liaison during the commissioning process. In 2000 Nick returned to the UK as Operations Manager at Seabank […]